What to do when a service line breaks
A water line break between the meter and the house can wash out soil, flood a yard and leave you without water. It also wastes water at your expense.
Stopping the flow comes first.
- Close the main valve at the house. If water still flows, the break is before the valve.
- The utility meter shutoff may be used with the right key. Do not force a utility valve.
- Mark the wet area with a stake or flag for the crew.
- Call the 24/7 line and describe where the water surfaces.
If the break is on the utility side of the meter, we help you contact the utility, Seacoast Utility Authority for many local customers, with the facts.
Who owns which part of the line
Utilities usually own the line up to and including the meter, and the owner is responsible for the pipe from the meter to the house. Rules differ by utility and address. If you are not sure, we find the break first, then tell you which side of the meter it is on.
That avoids repairing something that belongs to the utility and also prevents a long wait on something that does not. Call the utility's customer service for ownership questions about a specific meter. Florida's Underground Facility Damage Prevention and Safety Act, Chapter 556, sets the standard that a locate request goes through Sunshine 811 before anyone digs.
Repair methods
| Method | What happens | Where it fits. |
|---|---|---|
| Spot excavation | Dig to the leak, replace a section | A single break in an open yard. |
| Trench replacement | Replace the whole line in an open trench | Old pipe failing in several places. |
| Trenchless pull | Pull new pipe through the old path | Lines under driveways or landscaping. |
| Reroute | Run a new line along another path | Damaged or inaccessible original route. |
If the leak is inside the house, see leak detection first.
How a repair visit proceeds
Locate
We use a pressure test and acoustic gear to find the break.
Call before digging
Florida requires locating underground utilities before excavation, so we place the locate request.
Repair or replace
We cut in the new pipe with proper fittings.
Test and restore
We pressure test, backfill and restore the surface where agreed.
Why service lines fail in this area
Palm Beach Gardens has homes from many decades, and service lines can be copper, galvanized steel, polyethylene or PVC. Galvanized steel corrodes inside and loses flow. Polyethylene can fail at fittings. Tree roots and nearby digging also damage lines.
The Seacoast Utility Authority reports total chloramine averaging 3.7 ppm in its 2025 report, within the 4 ppm limit. That level is normal for treated drinking water. It is not itself a reason to replace a service line, but old galvanized pipe is.
Low pressure at every tap?
Call. A failing service line is a common cause.
Signs of a service line problem
- Wet soil between the meter and the houseWater surfaces where the pipe leaks.
- Sudden pressure drop at all fixturesA large leak before the house reduces what arrives.
- Meter running with the house valve closedWater is leaking before the shutoff.
- Sunken ground or a washed-out stripEscaping water removes soil.
- Discolored water after repairs nearbyPipe disturbance can stir sediment.
What affects water line repair cost
Excavation and restoration are the large parts.
Questions we hear most
Yes. The 24/7 line at (561) 448-8545 is open at all hours and we dispatch a plumber the same day when a slot is open. We help you stop the flow first.
If the meter keeps moving after the house valve is closed, or the yard is wet, the break is on the outside line.
A short break can be repaired. A line failing in several places is better replaced.
Yes. Underground utilities must be marked before excavation, and we arrange that.
Sometimes. Trenchless methods can avoid long trenches when conditions allow.
See leak detection for tracking down leaks inside walls and floors.
